Stile: Vertical piece
of cabinet door frame, there is one on the left and right side of the door. Rail: the horizontal piece of the cabinet door frame at the top and bottom of the door. Framing Edge: the cut of the outside of the cabinet door frame. Framing Bead: the decorative inside edge of the door frame.
What are cabinet parts called?
Face Frame
– The structural portion of the cabinet to which doors are attached, consisting of both rails and stiles. End Panel – The side of the cabinet that is grooved into the face frame and extends back to the wall. Bottom – The floor of the cabinet. On a wall and tall cabinet, the same component is used as the top.
What are the 5 parts of a cabinet door?
- Panel – The center section of a cabinet door. …
- Rail – The top and bottom pieces in the frame. …
- Stile – The left and right pieces in the frame.
- Outside Edge – The outside edge of the cabinet door. …
- Inside Edge – The inside edge of the cabinet frame.
What is the trim on cabinet doors called?
Cabinet moulding, sometimes spelled cabinet molding
, is a long, narrow decorative piece of wood that is used to give cabinetry a customized look. It can be used to cover the space between the cabinets and the ceiling, installed atop or below a cabinet, or inserted into the cabinet front.
What are cabinet door panels?
Cabinet panel doors that or flat or recessed will come with a
center panel
and it will be a little lower than the all the rest of the door design, and it will also consist of a little higher outer edge which defines the style of that door. These types of doors will be found in the more modern designs.
What is the front of a cabinet called?
Drawer or cabinet face
:This is the visible front of a cabinet or drawer. In standard cabinets, the face showcases the front of the door and the surrounding frame, depending on the style of cabinetry. In cabinet drawers, the face is the finished front of the box that contains a handle for opening the drawer.
What is a cabinet style?
In terms of cabinet style,
raised-panel doors, beadboard, and decorative panels such as stained glass, wire or tin
are commonly seen.
What are tall kitchen cabinets called?
What are
kitchen tower units
? Tall kitchen units are long, vertical units that stretch from the floor towards the ceiling, allowing you to make the most of the space in your kitchen.
Do you put trim behind cabinets?
Behind the cabinets,
the molding is not installed
. The cabinets butt against the wall and the shoe molding is terminated at the edge of the cabinet. Install shoe molding behind the refrigerator. The base molding behind the cabinets needs removing as well.
Is crown molding necessary on kitchen cabinets?
Crown molding is an iconic look for traditional cabinets. Without it,
wall cabinets are typically left incomplete and need the finished look
. This applies to kitchens that can afford to have the molding installed.
What are the three components called that make up a cabinet door?
Stile: Vertical piece of
cabinet door frame, there is one on the left and right side of the door. Rail: the horizontal piece of the cabinet door frame at the top and bottom of the door. Framing Edge: the cut of the outside of the cabinet door frame. Framing Bead: the decorative inside edge of the door frame.
Can you just change cabinet doors?
Can You Just Replace the Cabinet Doors?
You can definitely just replace cabinet doors
. If you're up for a little bit of work with some basic tools, and maybe a spare set of hands to help, you can even do it yourself.
Are Raised panel cabinet doors in style?
Like recessed cabinet doors, raised kitchen cabinets come
in any number of shapes and styles
. … As far as maintenance needs go, raised cabinets are functionally no different from recessed cabinets. However, if you are looking for a more formal style, then raised panels will give that style to you.
Can you use MDF for cabinet doors?
MDF is denser than hardwood and offers a much smoother finish with no grain. This makes MDF an
ideal material for making painted cabinet doors
. Due to its density and consistent structure, MDF can be machined using high speed CNC cutting tools to create a variety of different 3-D profiles perfect for cabinet doors.
What are the components of a cabinet?
- Cabinet Components. A kitchen cabinet is a simple wood box. …
- Cabinet Face Frame. Cabinet face frames provide stability, keeping the cabinet box square during shipping and installation. …
- Doors and Drawer Fronts. …
- Hinges. …
- Drawer Glides. …
- Drawer Box. …
- Interior Finish Material. …
- Cabinet Shelves.
How do I know my cabinet style?
Cabinet brands that belong to the Kitchen Cabinet Manufacturers Association (KCMA) will have a
sticker on the back side of the sink door or side wall of the cabinet
. On the sticker there should be a code or the cabinetry name in the middle of the label.