hello Allan49, the /24 is referring to
the subnet mask
. / 24 indicates that the first 24 bits of the address are masked (255.255.255.0). a /16 would translate into 255.255.0.0. Here is some more information you can refer to: Guide | Introduction to IP Addressing.
What IP address starts with 24?
| CIDR Subnet mask # of IP addresses | /25 255.255.255.128 128 | /24 255.255.255.0 256 | /23 255.255.254.0 512 | /22 255.255.252.0 1,024 |
|---|
What does the 24 mean at the end of an IP address?
2.0/24”, the number “24” refers
to how many bits are contained in the network
. … As all IPv4 networks have 32 bits, and each “section” of the address denoted by the decimal points contains eight bits, “192.0. 2.0/24” leaves eight bits to contain host addresses. This is enough space for 256 host addresses.
What does 16 or 24 after an IP address mean?
255.0 is commonly written as /
24
because it has twenty-four 1-bits. (Similarly /16 equals 255.255. 0.0.) (This number also directly corresponds to the length of the “network part” of the address, so it is often called the ‘prefix length’.)
What does the number after the IP address mean?
The number after the slash
represents the number of consecutive 1’s in the subnet mask
. For example, 192.168.10.0/24 is equal to the network 192.168.10.0 with a 255.255.255.0 subnet mask.
What does it mean 192.168 0.0 24?
Sign in to vote. 192.168.0.0 Refers to the IP adress /24 refers to
the subnet
. / 24 subnet is 255.255.255.0. 192.168.0.0/24 is common for home networks.
What is the subnet mask of 192.168 1.0 24?
| CIDR block IP range (network – broadcast) Subnet Mask | 192.168.1.0/25 192.168.1.0 – 192.168.1.127 255.255.255.128 | 192.168.1.0/24 192.168.1.0 – 192.168. 1.255 255.255.255.0 | 192.168.0.0/23 192.168.0.0 – 192.168.1.255 255.255.254.0 | 192.168.0.0/22 192.168.0.0 – 192.168.3.255 255.255.252.0 |
|---|
How do I know my IP type?
Open the Windows Start menu and right-click “Network.” Click “Properties.” Click “View Status” to the right of “Wireless Network Connection,” or ”Local Area Connection” for wired connections.
Click “Details
” and look for the IP address in the new window.
What is a 24 subnet?
A subnetwork or subnet is a logical subdivision of an IP network. … 100.0/24 is the
prefix of the Internet Protocol version 4 network starting at the given address
, having 24 bits allocated for the network prefix, and the remaining 8 bits reserved for host addressing. Addresses in the range 198.51.
What does IP 0.0 0.0 mean?
From Wikipedia, the free encyclopedia. In the Internet Protocol Version 4, the address 0.0. 0.0 is a
non-routable meta-address used to designate an invalid, unknown or non-applicable target
. This address is assigned specific meanings in a number of contexts, such as on clients or on servers.
What is the 16 after an IP address?
An /16 is usually
used to indicate the number of bits that are fixed (would not change) in a range of addresses of a network
. That is a simpler syntax to express the CIDR. Having an IP number as 1.2. 255.1/16 means that any address from 1.2.
How do you calculate the number of subnets?
To calculate the number of possible subnets,
use the formula 2n, where n equals the number of host bits borrowed
. For example, if three host bits are borrowed, then n=3. 23 = 8, so eight subnets are possible if three host bits are borrowed.
Who gives IP address?
Your IP address is assigned to your device
by your ISP
. Your internet activity goes through the ISP, and they route it back to you, using your IP address. Since they are giving you access to the internet, it is their role to assign an IP address to your device.
What does 32 mean after IP address?
Generally speaking, /32 means that
the network has only a single IPv4 address and all traffic will go directly between the device with that
IPv4 address and the default gateway. The device would not be able to communicate with other devices on the network.
Why IP protocol is considered as unreliable?
The IP layer provides an unreliable, connectionless delivery system. The reason why it is unreliable stem from the fact
the protocol does not provide any functionality for error recovering for datagrams that are either duplicated
, lost or arrive to the remote host in another order than they are send.
What does 28 mean in IP address?
Answer: 28 is
a subnet mask
. IP address has 32 bits in total. 28 denotes network ID while rest of the bits (which are 4 bits) are used for hosts.
