What Does The Oil Wrench Light Chevy Trailblazer?

by | Last updated on January 24, 2024

, , , ,

This is a

signal that the oil needs changing

. If that has been done, then the computer may not have been reset, after it was changed. If that is the case, then turn the switch on, do not crank engine. push the fuel pedal three times, quickly and it should flash, letting you know it has reset.

What does the light that looks like a wrench mean?

When the wrench light illuminates,

it is letting you know it is time to make an appointment for your next service

. This mostly serves as a warning or a reminder to make the appointment now.

Can you drive with wrench light on?

It is suggested that you have your car towed into a mechanic's garage, or, if you are one of the lucky few who still have your car on and able to drive, you drive your vehicle to a garage immediately.

It is unsafe to drive with this light on for long as it may stall and won't come back on at any given moment

.

How do you reset the oil life on a Chevy Trailblazer?

  1. Turn the ignition key to RUN with the engine off.
  2. Fully press and release the accelerator pedal slowly three times within five seconds. …
  3. When the light stops flashing, turn the key to LOCK. …
  4. Turn the Ignition On, Don't start the ENGINE.
  5. Use the DIC Button.

What does yellow oil can light mean?

When the oil light on your dashboard comes on, it might mean your

vehicle has low oil pressure

. This drop in oil pressure could be a sign of a few things: you are low on oil, your oil is dirty, or you have an oil leak.

Can you drive with a powertrain fault?

Having a powertrain failure or powertrain fault tends to happen to older and or higher mileage vehicles and

can cause your vehicle's power components to overheat

. If you ignore these warnings, your vehicle may operate in a defaulted “safe mode” until the issue has been resolved/repaired.

What would cause the powertrain light to come on?

The powertrain is usually referring to your car's engine system. … Generally, this indicator light means

a problem has been detected in the automatic transmission

(not applicable in manual transmission cars) or transaxle. This light can also indicate an Electric Shift Control system warning.

What is a powertrain malfunction?

The wrench warning light on Ford vehicles is the powertrain malfunction indicator light. When it illuminates, it means

that the computer has detected an issue with your vehicle's powertrain or four-wheel-drive system

.

When should I change the oil in my 2021 Chevy Trailblazer?

The broad guideline for Chevrolet vehicle is

between 7,000-10,000 miles

.

How do you turn off change oil light?


Push the accelerator pedal three times all the way to the floor, in less than 10 seconds

. Turn the ignition off, and the light will disappear, resetting the indicator.

Can you drive with yellow oil light?

Generally speaking, you have

about 2 weeks or 500 miles

of driving before a flashing oil light turns into a legitimate problem. But once it hits that point, things can go downhill fast, leading to serious mechanical damage. So, try to get your vehicle into a mechanic sooner rather than later.

Why is my oil light still on after oil change?

If your oil light stays on even after changing your engine oil, you're going to want to check

the sensor

first to rule out a malfunctioning sensor as the cause. Dirt and other particles can make their way into the oil pump, causing the sensor to falsely identify oil issues. … The next common cause is low oil pressure.

How much oil does a 2021 Chevy Trailblazer take?

Notes: OE Recommendation, Full synthetic. 5W-30.

5 quarts

container.

Why does my low oil pressure light keep coming on and off?

Low oil pressure means the

pump isn't circulating enough oil

, or there isn't enough oil in the system for the pump to circulate. The oil is important to keeping the surfaces lubricated, so if the oil light comes on and the pressure is low, pull over and turn off the engine.

What happens when the powertrain goes out?

The

vehicle may be receiving too much fuel or too little

. If it is not getting enough fuel, it will cough, choke, sputter and may even stall. If it is getting too much fuel, your fuel economy will decrease and your exhaust emissions will increase.

What are the symptoms of a bad powertrain control module?

  • Your ‘Check Engine' Light is On. …
  • Your Car Won't Start or Starts Roughly. …
  • Sudden Loss of Gas Mileage. …
  • You Failed Your Emissions Test. …
  • Your Engine Stutters or Stalls. …
  • Erratic or Random Shifting. …
  • You're Receiving a PCM-Related Error Code. …
  • What to Do If You Experience PCM Failure Symptoms.

What does a powertrain warranty cover?

A powertrain warranty covers almost

anything that is used to bring power to the wheels

. If one of these essential parts of the vehicle break down or become unusable, your powertrain warranty will replace or repair the part at no cost to you. … This is one of the biggest selling points of a powertrain warranty.

What causes powertrain control module failure?

PCMs typically fail for one of two reasons:

voltage overloads

(often due to a short in a solenoid or actuator circuit) or environmental factors (corrosion, thermal stress or vibration). … Thermal stress and vibration can form microcracks in circuit boards (which are repairable).

What does the powertrain control module do?

The powertrain control module, aka PCM, is your vehicle's brain. It

manages the engine, transmission and other systems based on information it receives from various sensors around the vehicle

.

How much does it cost to fix a powertrain malfunction?

This is because the cost of repairing damaged parts of the powertrain is expensive. You can spend

over $3,000 and above $2,000

to fix an engine and transmission.

How often should you change your oil Chevy TrailBlazer?

If your Chevy does not come with an oil-life monitor, your powertrain warranty has expired and you drive in normal conditions, you should change your oil

every 5,000 miles

. Note, it is advisable to change your oil every 3,000 miles if your vehicle is at least a decade old.

How often to change synthetic oil if don't drive much?

“While synthetic generally holds up better and can serve for more miles, it is equally important to not extend oil changes beyond the time interval recommended by the manufacturer—typically

six months or a year

if it is a motor that is not driven many miles or on many short trips.”

What kind of oil does Chevy dealers use?


Mobil 1 Full Synthetic Oil

.

How long does it take for the oil light to go off?

A car manufactured with an in-cabin messaging system will show the oil life of 10 percent to 100 percent at the center of the dash and takes

about five seconds

before it goes off.

What type of oil goes in a Chevy TrailBlazer?

The Chevy TrailBlazer with A4. 2L engine has an oil capacity of 7 Quarts, with the recommended oil being a

fully synthetic 5w-30 oil

.

What is Dexos 0w20?

0W-20 motor oil

The

low‐viscosity, advanced full synthetic formulation

of Mobil 1 0W-20 oils can help to increase engine efficiency and improve fuel economy versus higher viscosity oils. Many of our 0W-20 oils carry the dexos®1 approval* specified for General Motors vehicles.

Can cold weather affect oil pressure?

Cold Weather

Slows the Flow of Oil

When you start your vehicle, its oil pump forces oil under pressure through the oil filter, main bearings and other parts of the engine. During cold weather, an engine's motor oil becomes thicker. It flows more slowly through the engine and is harder to pump through the engine block.

What are the symptoms of low oil pressure?

  • Oil Warning Light. If the oil pressure drops below an appropriate level, your sensor may activate your oil warning light on the dashboard. …
  • Diminishing Engine Performance. …
  • Burning Oil Smell. …
  • Engine Noise. …
  • Engine Overheating. …
  • Low Engine Oil. …
  • Incorrect Oil Viscosity. …
  • Bad Oil Pump.

Why would my oil pressure be low?

When the oil pressure is low,

it indicates something is not working properly

. It also means there likely is not enough lubricant moving through the system. Keep in mind that lubricant starvation will lead to metal-to-metal contact and machine failure.

Can I just add oil to my car?

It's important

to add oil in small amounts

, and never add oil past the dipstick's “MAX” level. Too much oil in your engine can be just as bad as too little. Remove the funnel and replace the dipstick and oil fill cap. Make sure both are fully secured in place, then close the hood.

James Park
Author
James Park
Dr. James Park is a medical doctor and health expert with a focus on disease prevention and wellness. He has written several publications on nutrition and fitness, and has been featured in various health magazines. Dr. Park's evidence-based approach to health will help you make informed decisions about your well-being.