What Information Is Required On A Chemical Label?

All labels are required to have

pictograms, a signal word, hazard and precautionary statements, the product identifier, and supplier identification

. A sample revised HCS label, identifying the required label elements, is shown on the right. Supplemental information can also be provided on the label as needed.

What 3 things must be listed on a chemical transfer container label?

Words, symbols, pictures

, Globally Harmonized System (GHS) pictograms, or a combination thereof, which provide at least general information regarding the chemical’s physical and health hazards can be used on the secondary container label.

What are the requirements for chemical labels quizlet?

Chemical labels must

contain a product identifier, signal word and a pictogram to represent the hazards

.

Which of the following is not required on a chemical label?

A square red frame set at a point without a hazard symbol

is not a pictogram and should not be displayed on the label. The hazard statement should include the nature of the hazard(s) of a chemical, including the degree of the hazard, where appropriate.

What information is included on a chemical label and why is it important to read them?

Labels contain

information on the identity and proportions of the hazardous chemical and its constituents or ingredients

. They also contain information on the hazards of the chemical, precautions to be followed during its use, handling and storage, and instructions for the safe disposal of the chemical.

What information is required by OSHA to be included in each SDS?

The SDS includes information such as the

properties of each chemical

; the physical, health, and environmental health hazards; protective measures; and safety precautions for handling, storing, and transporting the chemical.

What information is found in the hazardous communication program?

Chemical manufacturers and importers are required to provide labels on shipped containers with the following information:

product identifier, signal word, pictograms, hazard statements, precautionary statements, and the name, address and phone number of the responsible party

.

What information must be on containers of toxic materials?

Labels for a hazardous chemical must contain:

Name, Address and Telephone Number • Product Identifier • Signal Word • Hazard Statement(s) • Precautionary Statement(s)

• Pictogram(s) Page 3 3 above, the label could state, “Do not breathe vapors or spray. Get medical attention if you feel unwell.

What information must you know before using a chemical product?

Every chemical container must be labeled by the manufacturer or supplier with general information on the potential hazards and how to use the product safely. The label at a minimum must have the:

name of the product, name and address of the manufacturer

, and the physical and health hazards associated with the product.

What information must be included on a workplace label?

• Product name (matching the SDS product name).
• Safe handling precautions, may include pictograms or other supplier label information.
• A reference to the SDS (if available).

What elements must be included in a Whmis 2015 label?

In WHMIS 2015, supplier labels for hazardous workplace products must display

the product identifier and supplier identifier

, as well as hazard pictogram(s); signal words (new); hazard statement(s); and precautionary statement(s) assigned based on the hazard classification.

Which of the following items must be included on the labels for secondary containers?

There are two mandatory pieces of information which need to be included on the Secondary Labels:

the identity of the hazardous chemicals within the product and the hazards

, either physical, health-related, or environmental, the components present.

What are the 5 required elements of a hazard communication program?

These are the Five elements of the Hazard Communication Standard. They are:

Chemical Inventory, Written Program, Labels, Material Safety Data Sheets, and Training

. The first element of the Hazard Communication Standard is for employers to develop inventories of all the hazardous chemicals they have at their worksite.

What are chemical manufacturers required to provide?

Chemical manufacturers and importers of hazardous chemicals are required to provide

an SDS with each initial shipment to

purchasers (distributors and employers) and whenever an SDS is updated.

What must be on the label of a pesticide product?

The name, brand or trademark under which the pesticide

product is sold must appear on the front panel of the label. 40 CFR 156.10(b)(1). The name and percentage by weight of each active ingredient and the total percentage by weight of all other/inert ingredients must be on the front panel of the label.

What information must be on containers of toxic materials such as cleaners and sanitizers taken from a larger container?

OSHA says you have to put the PRODUCT NAME, the

HAZARDOUS CHEMICALS it contains, and words or pictures that show the KEY HAZARDS

(e.g. inhalation hazard, ingestion hazard, skin absorption hazard, skin irritant, eye corrosion hazard, etc).

Is a pictogram required on a chemical label?

The Hazard Communication Standard (HCS) requires pictograms on labels

to alert users of the chemical hazards to which they may be exposed

. Each pictogram consists of a symbol on a white background framed within a red border and represents a distinct hazard(s).

How does Whmis provide information?

Under WHMIS information on hazardous products must be delivered in three ways:

labels on the containers of hazardous products

.

safety data sheets

, in addition to the label, with detailed hazard and precautionary information. worker education programs.

What information do the chemical hazard label and MSDS have in common?

Both the chemical hazard label and the MSDS share

information on the hazards that are associated with the chemical

.

What is the main difference between Whmis 1988 and 2015?

What products require a safety data sheet?

• Written Hazard Communication Program.
• Inventory of hazardous chemicals and hazard assessment.
• System for maintaining MSDSs.
• Chemical labels and warning signs.
• Training programs.

What SDS sheets are required?

OSHA only requires safety data sheets (SDSs)

for hazardous products or chemicals

. GLT Products, along with other manufacturers are not required to provide SDSs for non-hazardous materials or products. OSHA has left it up to the producer whether or not they should provide SDSs for non-hazardous materials.

What information does OSHA require in each SDS quizlet?

Includes

a list of hazardous chemicals known to be present, container labels, safety data sheets, and employee information and training

. SDS must be immediately available to employees.

What three pieces of information must be included on the hazard assessment document?

1.

The identification of hazardous chemicals

; 2. The maintenance of current hazard information at the worksite including warning labels, signs and SDSs; and 3. The training of employees.

Is the name and/or number used for the hazardous chemical on the label and the SDS?

Product identifier

is defined as “the name or number used for a hazardous chemical on a label or in the SDS. It provides a unique means by which the user can identify the chemical.

How can workers get information about the chemicals in a product?

What government agency in California sets the Permissible Exposure Limits (PELs) of chemicals? … How can you get information about the chemicals in a product?

Safety Data Sheets

.

SDSs

should be consulted by only after an emergency such as a spill, fire, or explosion.

When a chemical is transferred to a different container The new container must be labeled with?

If the chemical is transferred from the original manufacturer’s container to a different container, the container must be labeled with

a secondary label

.

What are the requirements for chemical labels quizlet?

Chemical labels must

contain a product identifier, signal word and a pictogram to represent the hazards

.

Who should be notified before applying a chemical?

Public authorities

, including State government departments, local councils, county councils and electricity network State owned corporations must give the public notice that they intend to use pesticides in outdoor public places such as parks and ovals and in public places near sensitive places such as childcare …

What types of containers must be properly labeled?

• Full name(s) of the chemical(s), in English. …
• Hazard identification such as flammable, toxic, corrosive;
• Date of transfer or preparation;
• Name of person who transferred or prepared the solution;

Which of the following pieces of information must be included on container labels?

This label must contain two key pieces of information:

the identity of the hazardous chemical(s) in the container (e.g., chemical name)

and the hazards present. There are many ways to communicate this hazard information. Employers should select a system that will work for each location.

What must be included on the chemical labels that appear on the manufacturer’s original packaging?

Original manufacturer labels

The label on an original chemical container must be legible and written in English. It must include

the chemical/product name as shown on

the SDS and the manufacturer’s name and address. Do not accept materials if the label is illegible or missing required information.

What are the six pieces of information required on a supplier label?

1. Product identifier — the brand name, chemical name, common name, generic name, or trade name of the hazardous product. 2. Initial supplier identifier —

the name, address, and telephone number

of the Canadian manufacturer or importer.

What information is not required on a workplace label?

Workplace labels do not require a border or specific wording; they do, however, require the following information:

Product identifier (product name matching that on the SDS)

, Information for the safe handling of the product, and. A statement that the SDS is available.

What is the minimum information required on a laboratory label for a container of 100 ml or less?

Containers with a capacity of 100 ml or less do not required a hazard statement or a precautionary statement on the label. Labels on containers with a capacity of

3 ml or less

can be designed to be removed at the work place if the label interferes with the normal use of the product.

What information features on a hazardous chemical label?

Labels for a hazardous chemical must contain:

Name, Address and Telephone Number • Product Identifier • Signal Word • Hazard Statement(s) • Precautionary Statement(s)

• Pictogram(s) Page 3 3 above, the label could state, “Do not breathe vapors or spray. Get medical attention if you feel unwell.

Which of the following is not required on a chemical label?

A square red frame set at a point without a hazard symbol

is not a pictogram and should not be displayed on the label. The hazard statement should include the nature of the hazard(s) of a chemical, including the degree of the hazard, where appropriate.

What information should be included in the precautionary information section of this workplace Whmis label?

Requirements include: Precautionary statements describe recommended measures

to minimize or prevent adverse effects resulting from exposure

, or improper storage or handling of a hazardous product, including protective equipment and emergency measures.

Do all products and chemicals have Whmis labels?

Not all products are controlled by

the WHMIS legislation, and so they may not have WHMIS labels or use the exact same symbols as WHMIS.