Class A Prescription Balance— A balance that meets the tests for this type of balance has a
sensitivity requirement of 6 mg or less with no load and with a load of 10 g on each pan
. The Class A balance should be used for all the weighing operations required in prescription compounding.
What is the weight limit of a Class A balance?
Class A prescription balance
this balance, the pharmacist should not weigh less than 120 milligrams of material (i.e., a 5% error in a weighing of 120 milligrams = 6 milligrams). Most commercially available Class A balances have a maximum capacity of
120 grams
.
What is class B balance?
The Class B balance is
optional equipment in the pharmacy
, which is used to weigh loads of more than 648 mg, and must be conspicuously marked “Class B.”
What class of balance do pharmacies use?
Most pharmacists will make their weight measurements on a Class III prescription balance. In fact, pharmacies are required by law to have such a balance in their facility.
How do you use a Class 3 prescription balance?
- Arrest the balance by turning the arrest knob. …
- Set the internal weights to zero. …
- Level the balance (left to right) by adjusting the leveling screw feet. …
- Place one weigh boat on each weighing pan.
When would you use a Class A torsion balance quizlet?
When using a Class A Torsion balance to weigh Acetaminophen powder: The weight
goes
on the right pan and the powder goes on the left pan. The AWP for a drug is $33.50 with a 15% discount from the wholesaler.
Which device is used to shrink bands onto vials?
Our latest
HT6B Heat Tunnel machine
automatically shrinks tamper-evident neck bands and sleeve labels onto glass bottles, plastic bottles and other containers.
What are the 3 different types of balance?
There are three different types of balance:
symmetrical, asymmetrical and radial
. The human figure in this diagram is symmetrically balanced; the same on the left and right sides of a central axis.
What is class A prescription balance?
Class A Prescription Balance— A balance that meets the tests for this type of balance has
a sensitivity requirement of 6 mg or less with no load and with a load of 10 g on each pan
. The Class A balance should be used for all the weighing operations required in prescription compounding.
What is D and E in weighing balance?
The
value “d” is the smallest division shown on the scale display
. The value “e” is the verification scale division. It represents the stated accuracy of a scale when the scale display has extra units added in order to expand the resolution.
What is the sensitivity of the balance?
A balance is said to be sensitive when it can register small differences in weight. The balance beam is most sensitive
when its center of gravity lies slightly below its rotation axis
.
Which of the following medications must be refrigerated?
A range of medicines need to be refrigerated. These include
insulins, antibiotic liquids, injections, eye drops and some creams
. These medicines must be stored between 2oC and 8oC.
What is a top loader balance?
A top loading balance (also referred to as toploader balance) is
among the most common types of weight measuring scales used in the laboratory
. … Compact top loading balances are calibrated with fully automatic time and temperature controlled adjustment, an internal or external weight, or clock calibration.
What are the uses of analytical balance?
Analytical balances are precision measuring instruments used
in quantitative chemical analysis
, to determine the mass of solid objects, liquids, powders and granular substances.
Why is there a need for balances to be properly calibrated before use?
Properly calibrated balance
gives accurate results and decreases probability of a weighing mistake which can cost extra time and money
. It is safe to say, calibration is an investment that builds customer confidence. Using non-calibrated equipment can lead to production problems such as: unscheduled downtime.
