Dock Levelers are sometimes called pit levelers because
they are mounted within a pit on the dock surface to be level with the driving area
. Buyers can choose between mechanical and powered dock levelers.
What is dock leveling?
Dock levelers
bridge the gap and height difference between the dock and the trailer
. They also compensate for the up and down float of the trailer bed during loading. A dock leveler includes a ramp (hinged along its rear edge) and a lip (hinged at the front of the ramp).
What does a loading dock leveler do?
A dock leveler
forms a ramp to bridge the distance between the dock and truck
. It must be able to compensate for the up-and-down movement of the trailer during loading and unloading.
How does a mechanical dock leveler work?
A mechanical dock leveler:
It
must be positioned onto a trailer by first pulling a chain (at the leveler’s rear)
which sets the “hold down” system free, letting the platform rise and the lip extend. The operator then must walk onto the platform and use his bodyweight to lower the leveler onto the trailer bed.
What is a recessed loading dock?
Loading dock.
A recessed bay
in a warehouse or facility where trucks are loaded and unloaded with inventory
, which can be located on the building’s exterior, flush with the building envelope, or fully enclosed.
How long does a dock leveler last?
Mechanical Levelers: These have a
5- to 7-year life expectancy
, due to springs wearing out, hold-downs failing and lack of proper maintenance and adjustments.
How much does it cost to install a dock leveler?
There are numerous considerations when pricing a dock leveler.
Budget $7,500
for a leveler from a reputable manufacturer. Cheap levelers come at a HIGH cost to your facility.
How do I remove dock leveler?
If there is an existing leveler, it will need to be cut out.
Use a torch to cut all welds to the pit
and remove the existing leveler from the pit. Now, grind off all residual welds and burrs on both the front and rear embedded curb angles. It is important that the new leveler is installed flush with the floor level.
What is a mechanical dock leveler?
Poweramp mechanical dock levelers are
an economical solution to basic applications
, while still providing strength and durability. These levelers use a pull chain activation to raise the deck. The operator then simply walks the deck back down to the bed of a trailer or to a stored position.
How wide does a loading dock need to be?
Each truck bay should be
at least 12 ft wide
to provide enough space for the trailers, which are 8’0′′ to 8’6′′ wide, to back squarely to the dock. To reduce congestion, design 14 ft wide bays. If swinging trailer doors will be opening or closing at the dock, the center distance should be at least 14 ft (Figure 32).
What does dock door mean?
Dock Doors: Dock doors are
a type of loading dock which
are usually raised in the air in order to be level with trucks carrying goods. The trucks can back straight up to the dock door without having to change position or lower ramps.
What does it mean to dock a ferry?
Docking your boat refers
to pulling your vessel up to a dock as parallel as you can, and then using
ropes (dock lines) and nautical knots to secure (fasten) the boat to the dock. … However, just like parallel parking a car, docking a boat gets easier and easier each time you do it.
