Prior to issuing a respirator, employers must
have a written respiratory protection plan
. The plan is required to include key information such as respirator selection, medical clearance/questionnaire, training, fit testing, and proper use/storage of the respirator.
What are OSHA requirements for respirators?
- Use environmental controls where feasible to control the hazard;
- Provide an appropriate respirator.
- Ensure the use of an appropriate respirator, and.
- Institute a respiratory protection program.
What is required before using a respirator OSHA quizlet?
Before any required use,
the employee must be fit tested on the same make, model, style and size of the respiratory that will be used
.
What does OSHA require employees to do before breathing equipment?
Employees must be fit tested before they
use a respirator
for the first time; whenever they use a different respirator face piece; and after any changes in the physical condition that could affect respirator fit.
Which conditions may compromise your ability to use a respirator?
The following conditions may compromise the effective use of the respirator and jeopardize worker protection:
facepiece seal leakage
; removing the respirator at the wrong times in hazardous atmospheres; not properly performing user seal checks; or not properly repairing defective parts.
Are all types of respirators the same OSHA?
Your respirator will need different types of filters, cartridges, or canisters depending on the type and amount of airborne contaminant in your workplace. … This is a number that OSHA has assigned to each class of respirators.
What are the 3 required steps prior to wearing a respirator?
Prior to issuing a respirator, employers must have a written respiratory protection plan. The plan is required to include key information such as
respirator selection, medical clearance/questionnaire, training, fit testing, and proper use/storage of the respirator
.
How do you determine if a respirator is needed?
Q: When is the use of respirators required? A: OSHA’s respirator standard, 29 CFR 1910.134, requires the use of respirators to
protect employees from breathing contaminated and/
or oxygen-deficient air when effective engineering controls are not feasible, or while they are being instituted.
Is an N95 a respirator?
An N95 respirator is
a respiratory protective device
designed to achieve a very close facial fit and very efficient filtration of airborne particles. … Surgical N95 Respirators are commonly used in healthcare settings and are a subset of N95 Filtering Facepiece Respirators (FFRs), often referred to as N95s.
What qualifies as a respirator?
Response: A filtering facepiece respirator is defined in 29 CFR 1910.134(b) as “a
negative pressure particulate respirator with a filter as an integral part of the facepiece or with the entire facepiece composed of the filtering medium
.”
What are the three types of respirators?
The three basic types are:
Half Mask/Dust Mask, Half Mask (Elastomeric), and Full Facepiece (Elastomeric)
. 2. Non-Powered Air-Purifying Respirators: When using a non-powered air-purifying respirator, the user operates it simply by breathing.
Is it always the employee’s responsibility to make sure they wear their respirator?
It’s
the employer’s responsibility
to make sure each employee is medically approved to wear a respirator. … It’s the employee’s job to wear the respirator correctly and follow the manufacturer’s guidelines for cleaning and storage.
Is the common drinking cup allowed in the workplace?
Any container used to distribute drinking water shall be clearly marked as to the nature of its contents and not used for any other purpose.
The common drinking cup is prohibited
.
What is the best respirator for sanding?
For simple wood sanding, some folks recommend the
old standard 3M 8210 particulate respirator
. Lots of people would call this style a dust mask. Others would say that it’s barely better than nose hair. It’s an N95 which means it will filter out 95% of the particulate matter, which is certainly better than nothing.
How long can you wear a full face respirator?
This type relies on the wearer’s breathing to pull the air through the filter. These masks have inlet and outlet valves which must be in good condition. Full face masks are uncomfortable to wear continuously for
more than 1 hour
.
What are the two general types of respirators OSHA?
Two basic types of respirators are:
• air-purifying; and • supplied-air respirators
.
