Strip and wax jobs are charged by the square foot. The price you charge your client can vary due to several factors, but the national average is 30 to 60 cents per square foot . However, some jobs can go up to 90 cents or more depending on how difficult the job is.
How do you calculate stripping and waxing floors?
Strip & Wax Floor Prices
HomeWyse states that average cost to strip and wax a floor is about $174. The lowest cost you could expect to pay is about $148 while the highest cost is about $200. This cost estimate is based on a 314 sq ft room. This makes the average cost of stripping and waxing a floor at $1.80 per sq ft.
How long does it take to strip and wax a floor?
The team at ServiceMaster of Kalamazoo are professionals that follow the important steps and techniques, using powerful equipment in order to produce a spotless, protective, and attractive finish to your floors in about 7 hours .
How do you calculate floor stripping?
- Cost of stripper (10,000 sq ft / 1,000 sq ft per gallon = 10 gallons x $15 = ($150) = 1.5 cents per square foot.
- Cost of finish (5 coats x 10,000 sq ft / 2000 sq ft per gallon = 25 gallons x $14ea = $350) = $.035 cents per square foot ($350)
- Cost of pads, mops, etc. (
How long does it take to strip and wax 1000 square feet?
Wax 1000 sq.
Rectangular Machine (48” plt) 3.5 min . Buff with steel wool 20 min. Strip and rewax (1 man) 150 min. Dry strip and rewax (1 man) 120 min.
Can you wax a floor without stripping it?
Technically, you do not have to strip the floor before you wax it . However, if you believe that there are too many coats of wax on the floor, causing the floor to become dull, then it’s best to first strip the floor before applying a new coat.
How many square feet does a gallon of floor wax cover?
Most wax finishes, like our Optimal Wet Look Floor Finish will cover approximately 2,000 square feet per gallon . Each finish is different, but most recommend 4 to 5 coats. For example, 1 gallon of Optimal would provide 5 coats on a 20′ x 20′ (400 ft2) room.
What dissolves floor wax?
Combine 2 gallons hot water, 2 cups household ammonia and 1 cup of powdered dishwasher soap (with no bleach), and apply to the floor to dissolve the wax quickly.
What is a good floor wax remover?
- Rejuvenate All Floors Restorer. ...
- Weiman Hardwood Floor Cleaner And Polish Restorer. ...
- Goo Gone Pro-Power. ...
- Orange-sol De-solv-it Remover. ...
- Trewax Instant Wax Remover. ...
- Liberon Wax And Polish Remover. ...
- Zep Floor Stripper. ...
- Lundmark High Power Wax Remover.
How much do you charge to buff a floor?
Expect minimum charges of $90-$150 . Buffing and stripping machines can be purchased for residential or commercial use. Typically, buffing and stripping machines cost $100-$1,500.
How much does it cost to get my floor buffed?
| Method Cost | Hardwood floor cleaning $.50 – $.75 per square foot | Buffing $1.25 – $1.75 per square foot | Coating $.65 – $1.25 per square foot |
|---|
How much does it cost to wax a gym floor?
How much does gym floor refinishing cost? The average price for gym floor refinishing is between $2.00 and $3.00 per square foot , depending on the cost factors listed below.
How do you price a wax?
- Arms – between $35 to $50.
- Armpits – between $20 to $25.
- Back – between $50 to $65.
- Bikini – between $30 to $40.
- Brazilian – between $55 to $90.
- Chest – between $50 to $55.
- Chin – between $10 to $18.
- Eyebrows – between $10 to $20.
Does VCT need to be waxed?
Once new VCT is installed, it must be properly stripped and waxed with at least two coats of wax applied . For the best results, have the VCT stripped and waxed prior to moving furniture or people into the space, ideally allowing a full 24 hours of cure time before it is walked on.
