The railroad crossbuck sign is placed at railroad crossings where the tracks cross the roadway. The crossbuck sign can be treated in the same manner as a YIELD sign:
slow down, listen for trains and be prepared to stop if you see or hear a train approaching
.
What do you do at a Crossbuck sign?
Crossbuck signs
indicate there is a railroad crossing
. They should be treated similar to yield signs. If a train is approaching, the driver should never try to beat the train across the tracks. Instead, they should stop and wait for it to pass.
When approaching a railroad crossing sign you should?
Explanation When you see any signs indicating a nearby railroad crossing, you
should slow down, look for a train
, and be ready to stop. If the red warning lights are flashing or the gate is down, you must stop 15 to 50 feet before the railroad tracks. Do not try to go around the gate.
What is the appropriate action to take when approaching a railroad crossing that does not have signs?
Explanation When approaching an unmarked railroad crossing, slow down and be prepared to stop. Before you cross, be sure that no trains are approaching from either direction
on
any track. If you see or hear a train coming, stop at a safe distance from the nearest track and wait to proceed until after the train passes.
Is a Crossbuck equivalent to a stop sign?
The
YIELD or STOP sign may be installed on the same support as the Crossbuck sign
or it may be installed on a separate support; in either case the YIELD or STOP sign is considered to be a part of the Crossbuck Assembly.
What does a pennant sign indicate?
The pennant-shaped yellow and black traffic sign marks
the beginning of an area where you may not pass other vehicles
. (a “no passing” zone). … They account for unseen hazards such as driveways, intersections, and other places where another vehicle may enter the road ahead.
What does the number below the crossbuck mean?
look for advance warning signs and the crossbuck symbol (a large white X with a red outline); if there is more than one track, the sign below the crossbuck will indicate
the number of tracks
; … call the 1-800 number posted on or near the crossing signal or the local law enforcement agency if a signal is malfunctioning.
What steps will you take when crossing railroad tracks?
- Approach with care. Warn others that you are slowing down. …
- Prepare to stop. …
- Look both ways and listen carefully. …
- If it won’t fit, don’t commit. …
- Look again. …
- Cross tracks with care. …
- Keep going once you start, even if lights start to flash or gates come down.
What should you do when approaching a railroad crossing quizlet?
Never proceed until you are certain it is safe to do so. What should you always do when approaching a railroad crossing? When required to stop, you should do so
within 50 feet, but no less than 15 feet from the nearest rail of the crossing
.
What should you do when approaching a railroad crossing with flashing lights?
You must always stop if the railroad gates start to go down
. Flashing red lights at a railroad crossing means you must stop. Stop at least 15 feet, but no more than 50 feet from the nearest track.
What is the appropriate action to take when approaching a railroad crossing that does not have signals quizlet?
What is the appropriate action to take when approaching a railroad crossing that does not have signals to direct traffic?
Slow down and be prepared to stop.
What should you do when approaching a railroad crossing without mechanical gates or lights?
- Cross the tracks as quickly as possible.
- Slow down to 15 mph and be prepared to stop if necessary.
- Stop on the tracks and look both ways.
- Approach the railroad tracks at 25 mph.
What is the appropriate action to take when approaching a railroad crossing that does not have signals such as lights OT crossing gates?
When approaching a railroad crossing that has no warning signals (such as electric flashing lights or gates),
a driver should slow down, look, and listen
.
Do regulatory signs have to be obeyed?
Explanation Regulatory signs regulate the movement of traffic. They are usually white with black markings and
must always be obeyed by motorists
.
What is the most common sign at a railroad crossing?
CROSSBUCK sign
Most common sign at public highway-rail intersections.
When you enter an open intersection you must yield the right of way if?
Also, yield to the vehicle or bicycle that arrives first, or to the vehicle or bicycle on your right if it reaches the intersection at the same time as you. At
“T” intersections without “STOP”
or “YIELD” signs, yield to traffic and pedestrians on the through road. They have the right-of-way.
When you see a pennant shaped sign you must?
The sideways-pointing triangle of a pennant sign on the road
tells drivers to stay in their lane and not pass other vehicles
. This particular shape is not used for any other type of message on the road.
What does a crossbuck indicate?
Crossbuck signs are found at highway-rail intersections. They are
yield signs
. You are legally required to yield the right of way to trains. … When the road crosses over more than one set of tracks, a sign below the Crossbuck indicates the number of tracks.
What is an effective way to avoid backing up tragedies?
- Do a walk around. …
- Know your vehicle’s blind spots. …
- Know clearances. …
- Don’t delay. …
- Use your mirrors. …
- Back slowly. …
- Look and listen.
Where are Pennant signs placed?
The pennant shaped sign is always yellow with black text and placed
on the left side of the road
, never on the right side. The reason it is placed on the left side of the road is that the pennant sign is often complemented by a regulatory white and black “do not pass”-sign on the right side of the road.
How long does it take for a locomotive train to stop going 55 mph?
“The average freight train is about 1 to 11⁄4 miles in length (90 to 120 rail cars). When it’s moving at 55 miles an hour,
it can take a mile or more to stop
after the locomotive engineer fully applies the emergency brake. An 8-car passenger train moving at 80 miles an hour needs about a mile to stop.”
How far must Motorists stop at a railway crossing showing warning signals?
Railroad crossing safety
Always be prepared to slow down and stop
at least 15ft away
from the railroad crossing. You must look for trains in both directions on each track if more than one track is present. Never proceed across railway tracks if you see any of the following: A flashing red light.
What is the best way to approach driving over railroad tracks?
Always approach with caution
.
“When you see tracks, think train,” Corcoran said, emphasizing how important it is for drivers to approach railroad crossings with caution. Whether or not there’s a signal, stop at the railroad crossing to look both ways before proceeding (quickly) over the tracks without stopping.
What steps will you take when crossing railroad tracks quizlet?
When you come to any railroad crossing you
should always slow down
. You should stop on railroad tracks only if the vehicle ahead of you has stopped. Always wait for the vehicle ahead of you to clear the tracks before you start across. Never stopped on the railroad tracks.
What are the things must be careful while crossing a railway track?
Wait until you can see clearly around the first train in both directions. Never walk around or behind lowered gates at a crossing.
Do not cross the tracks until the lights have stopped flashing
and it is safe to do so. You can be fined for failure to obey these signals.
What are five 5 things to remember when you approach a railroad crossing?
- The cross buck sign means yield. Trains must be given the right-of-way at all times! …
- Always expect a train. …
- Trains cannot stop quickly. …
- Do not try to beat the train. …
- Never drive around lowered gates. …
- Do not get trapped on the tracks. …
- Look for a second train.
When approaching a railroad crossing with flashing lights you must quizlet?
Flashing red lights, lowered crossing gates and/or a bell at a railroad crossing indicate that
you must stop, at least 15 feet (5 m) from the tracks
. Do not go across the tracks until the lights and bell have stopped and the crossing gates are completely up.
When approaching a railroad crossing with flashing lights you must NJ?
When approaching a railroad crossing with flashing lights, you must:
Stop at least 15 feet from the railroad crossing
. On a two lane road, not near a school, when a school bus is stopped and its red lights are flashing: : A motorist must stop 25 feet away from the school bus.
When approaching an intersection What should you do?
- A driver who approaches an intersection must yield the right-of-way to traffic that is in the intersection. …
- If drivers approaching from opposite directions reach an intersection at about the same time, a driver that turns left must yield to traffic that moves straight or turns right.
Which of the following actions should you take when approaching a railroad crossing that has the gates lowered with signals flashing and bells ringing?
Motorists must stop at least 15 feet from railroad crossings
when… – there are flashing lights, bells or flag signals. Lowering gates, or gates that have already been lowered, indicate a train is coming, and a motorist must stop. Never attempt to cross until the gates have been raised and lights have stopped flashing.
When approaching railroad tracks should I train?
Think Train!” to encourage people who are near railroad tracks to expect a train
at any time
. “The train does not always run at a set schedule, and it is hard to predict,” Snipe said. “People think certain tracks are out of service. You know a train can come at any time, so we tell people to look, listen and live.”
When you are approaching a railroad crossing and there are no safety barriers you should?
If you are approaching a railroad crossing that has no safety barrier,
cross the tracks only after checking in both directions for any oncoming trains
. If a train is approaching, come to a complete stop at a safe distance and wait for the train to pass. Never try to outdrive a train.
When approaching a railroad crossing with no signal lights or crossing gates you should?
Explanation
Always be prepared to yield to any oncoming trains
before crossing railroad tracks, particularly if there are no lights or gates controlling the crossing. Never start to cross the tracks until there is room for your entire vehicle on the other side of the tracks.
Is an approaching train is near enough to be a danger you must?
Explanation You should look and listen for trains before crossing any railroad tracks. If an approaching train is near enough or going fast enough to be a danger,
you cannot go across the tracks
. This is true even if they have no signals or the signals are not working.
What action should you take when approaching a railroad crossing?
Explanation When approaching an unmarked railroad crossing,
slow down and be prepared to stop
. Before you cross, be sure that no trains are approaching from either direction on any track. If you see or hear a train coming, stop at a safe distance from the nearest track and wait to proceed until after the train passes.
What vehicle must stop at a railroad crossing?
Which vehicles must stop at all railroad crossings? Explanation
School buses
(with or without passengers), transit buses with passengers onboard, and vehicles carrying explosives or flammable cargo must stop at all railroad crossings.
When approaching a bicyclist from the rear you should slow down and?
When approaching a bicyclist from the rear, you should slow down and:
Wait until it is safe to pass the bicyclist with at least three feet of clearance
. A green arrow showing at the same time as the red traffic light means: You may go in the direction of the arrow with caution.
When an emergency vehicle comes up behind you you should ______?
When an emergency vehicle is approaching:
Pull over to the edge of the roadway
, clear of intersections, and stop. Remain there until the emergency vehicle has passed. Watch for others.
When you are driving your vehicle catches fire under the hood?
Stop the car and turn off the ignition. Get every person out of the car, and don’t allow anyone to go back to retrieve personal items. Move far from the burning vehicle to avoid the flames and toxic fumes—at least 100 feet—and also keep bystanders back.
Call 911
.
What do regulatory signs do?
Regulatory traffic signs are white with black or red letters instructing road users what they must or must not do under certain conditions. Regulatory signs
indicate and reinforce traffic laws and regulations which apply either permanently or at specified times or places
.
How do you identify regulatory signs?
Regulatory signs
Regulatory signs are circular and
may be supplemented by plates beneath augmenting the message given
by the symbol. The exception to this is the STOP symbol, which is octagonal.
