| Magnum Bolt Pattern (Lug Pattern) PCD 5×115 See Adapters | Thread size (Lug Nut Size) M14 x 1.5 Lug Nuts | Stock Rim Sizes Range 18×7.5 – 24×10.0 Hubcaps | Custom rim sizes range R22 – R24 Aftermarket Wheels | Tire sizes 215/65 R17 , 225/60 R18 , 245/50 R19 , 255/45 R19 , 245/45 R20 , 265/30 R22 |
|---|
What size rims fit a Dodge Magnum?
| Magnum Bolt Pattern PCD 5×115 See Adapters | Center bore (hub bore) 71.5 Find Hub Centric Rings | Thread size M14 x 1.5 Buy Lug Nuts | Stock Rim Sizes Range 18×7.5 – 24×10.0 Get Hubcaps | Custom rim sizes range R22 – R24 |
|---|
Will Dodge Charger Rims fit Dodge Magnum?
Re: will Magnum, 300, or Charger wheels fit?
Not likely
… Unless the Dodge and Chryslers made here in the USA are using a German/Mercedes bolt pattern 5x112mm. The stock bolt pattern listed for a 2007 Chrysler 300C SRT8 and the Dodge Magnum SRT8 is 5x115mm… so not likely.
How do I know what rims fit my car?
The two easiest ways are to check the sticker plate in your car,
it should be located inside the driver side door
, or look online for the vehicle specifications for your exact make and model. That should tell you the standard rim size.
Will rims from one car fit another?
Typically,
you can swap your rim with the one from another vehicle
. However, this depends on several factors such as the size (diameter and width), center bore, offset, and bolt pattern on the respective rims. Overall, both sides should have matching features.
What size tires go on a Dodge Magnum?
Depending on trim level, the Dodge Magnum has tire sizes including, but not limited to P215/65R17,
P225/60R18 and P245/45ZR20
.
What is the bolt pattern on a 2007 Dodge Magnum?
The 2007 Dodge Magnum has a wheel bolt pattern of
5x115mm
.
Will Chrysler 300 rims fit a Dodge Magnum?
Yes
, they will fit as long as the Magnum wasn’t a SRT or AWD car.
Are all 17 inch rims the same?
Common rim sizes include 15, 16 and 17 inches. Rim size will vary depending on the make and model of the car and manufacturers may release different models of the same car with different rim size options.
How do rim sizes work?
The wheel size is the
size designation of a wheel given by its diameter, width, and offset
. … For example, 17 x 8.5 x +35 designates a diameter of 17 inches, width of 8.5 inches, and +35 mm positive offset (432 × 216 x +35 in fully metric numbers).
What is my wheel offset?
Your wheel offset is
the distance from where you mount your wheel to the wheel’s center
. The centerline is the literal “center” of the width of your wheel. This centerline is also known as a 0 mm offset. That’s important to note because your wheel offset is always measured in millimeters.
Are all 5 bolt patterns the same?
The hub lug bolt pattern will be determined by the number of lug bolts and the distance between the opposing hub bolt (see 4-lug hub diagram). All but 5
–
lug patterns are measured in this manner. If your trailer wheel hubs have 5 lug bolts, measuring is slightly different. … Be sure that you skip one bolt when measuring.
Can I use a different bolt pattern?
Bolt Pattern or Bolt Circle
The
bolt pattern is specific to a vehicle and can’t be changed
. It has to be the exact same pattern on the wheel. However, some wheels are universal and can be installed on various bolt patterns and vehicles.
Are chevy and Nissan wheels interchangeable?
Chevy can go on Nissan but not
vise versa. Nissan has a smaller hub diameter. Rim would need to get bored out. depending on it’s inner hub diameter.
What size tires go on a 2007 Dodge Magnum?
| 2007 Dodge Magnum | Rim Size Tire Sizes Dodge Magnum Options | 17-Inch 215-65-17 SESXT (RWD) | 18-Inch 225-60-18 R/T (AWD)R/T (RWD)SXT (AWD)SXT (RWD) | 20-Inch Front: 245-45-20 Rear: 255-45-20 245-45-20 SRT8 |
|---|
