Where To Buy Bike Spokes?

by | Last updated on January 24, 2024

, , , ,

Spokes are usually

$1.00 – $2.00 each

. Any shop will sell individual spokes. Labor to replace a spoke is $10 – $20 depending on your location.

Are bike spokes universal?


Spoke lengths are unique to each wheel, rim, and spoke angle (cross 2, cross 3, etc) combination

. Non OEM combinations require special spokes, Buchanan Spokes is a reliable resource.

How do you buy spokes?

In general terms,

the more spokes a wheel has, the more the load is spread and the stronger the wheel should be

. Conversely, less spokes means a lighter wheel, so a wheelbuilder must strike a balance between desired strength and light weight.

How do I know what spokes to buy?

  1. Trends in earnings growth.
  2. Company strength relative to its peers.
  3. Debt-to-equity ratio in line with industry norms.
  4. Price-earnings ratio can give an indication of valuation.
  5. How the company treats dividends.
  6. Effectiveness of executive leadership.

Can you replace spokes on a bicycle wheel?


A faulty or damaged spoke should simply be replaced

. In a properly built wheel, stainless steel spokes don’t fail through fatigue, so a fatigue failure can be the first of many. Two or more fatigue failures means the best option is to rebuild the whole wheel with new spokes.

Is it OK to ride a bike with a broken spoke?



Yes! Riding a bike with a broken spoke will not cause much harm to the wheels

. However, we suggest you remove the spoke from the nipple to avoid further damage to the tires.” That said, riding the bike with only one or two broken spokes is not dangerous.

How do I know my spoke size?

Pull both spoke heads inward towards the center to seat the nipples. Using the narrow tips of the caliper jaws, measure from inside to inside of each J-bend. Record this measurement to the nearest tenth of a millimeter. In our example, each spoke measured 266 mm, with the J-bend-to-J-bend at 35.7 mm.

How do I know what size spokes I have?

How do you replace a spoke?

What sizes do bike spokes come in?

A majority of mountain bike wheels use either

24, 28, or 32

spokes per wheel depending on their intended use.

Are all spoke nipples the same size?


Spoke nipples are typically square, and come in different sizes

. The correct wrench is the smallest size that can be used, even if it seems slow putting the wrench on the nipple. Make sure the wrench is fully engaged on the nipple before turning.

Are all spokes the same size?


You may need as many as three different spoke lengths

. One length for the front wheel, one for the rear drive side, and one for the rear non-drive side.

How do you replace spoke nipples?

How do you change a spoke without removing a tire?

How do you fix a broken spoke?

If the spoke’s snapped inside or near the nipple, replace it. Remove the tyre and rim strip, then use a magnetic screwdriver to pull the nipple out of the hole. Thread a new one onto the end of a spoke, feed it through the hole and then unscrew the nipple from the spoke.

What causes broken spokes on a bicycle?

Bike spokes break most commonly due to

wear and tear

. A high-frequent cause for spoke breaks is that the rider has hit a curb or pothole, doesn’t maintain the bike well, or the passenger is too heavy for that model. Rougher terrain will also deteriorate the rims faster, which in turn deteriorates the spokes faster.

How many spokes can you lose?

It is pretty safe if only one spoke is broken. But if

three or four spokes have broken, it’s best to stop cycling

. This could lead to more spokes breaking, the wheel bucking and more expensive repairs. And if your wheels are ​lights, they may fall off if many spokes break.

How do you install bike spokes?

How do you measure bicycle wheel spokes?

Spoke length is

measured from the inside of the elbow, as shown in the image below, to the threaded end

. When measuring a spoke using a tape measure, a second spoke may be used to hold the elbow of the spoke and the tape measure’s tab, as shown.

How many spokes should a bike wheel have?

Number of spokes

Conventional metallic bicycle wheels for single rider bikes commonly have

24, 28, 32 or 36 spokes

, while wheels on tandems have as many as 40 or 48 spokes to support the weight of an additional rider. BMX bikes commonly have 36 or 48 spoke wheels.

How do you make a bike 32 spoke?

What size spoke for 29er?

Holes Rim Type Rear-O/S 32 X319 650B (27.5′′) Disc 272
32


XM319

29er Disc 290
32 XM719 260 32 A119 294

What does 14g spokes mean?

Spoke Gauge Diameter and millimetre size. 15g = 1.8mm. 14g =

2.0mm

.

What are the strongest bicycle spokes?

Meet

Berd PolyLight bike spokes

. These unassuming, flexible fabric spokes made from the world’s strongest polymer will revolutionize bike wheels forever. The latest upgrade in cycling tech will happen in one of the last places you’d expect: spokes.

Diane Mitchell
Author
Diane Mitchell
Diane Mitchell is an animal lover and trainer with over 15 years of experience working with a variety of animals, including dogs, cats, birds, and horses. She has worked with leading animal welfare organizations. Diane is passionate about promoting responsible pet ownership and educating pet owners on the best practices for training and caring for their furry friends.