The model number on a Husqvarna riding mower is printed on a metal tag or sticker located on the frame near the left‑rear wheel (often on the underside of the seat) and may also appear on the back of the deck.
Where do I find my riding mower model number?
The model number is on a metal plate or sticker attached to the mower frame near the left‑rear wheel, or on the underside of the seat.
First things first: park the mower on level ground, shut off the engine, and pull the spark‑plug wire for safety. Then hunt for a rectangular metal tag stamped with numbers – the first two digits often tell you the product series (think 13, 14, 17, or 53). If it’s not visible, lift the seat and peek underneath; the plate likes to hide there. Want to double‑check? Have a look at the Husqvarna support page Husqvarna.
Where is the serial number located on a Husqvarna lawn mower?
The serial number is on a sticker or metal plate on the back of the deck, directly behind the engine.
Before you start, engage the brake and pull the key out. The serial tag usually shows up as a white label with a barcode, sometimes hiding under a plastic cover. Jot down the full alphanumeric code – the first characters often tell you the production year. For decoding help, check out the Husqvarna serial‑number guide Husqvarna.
How do I find the make and model of my lawn mower?
Check the engine plate and the mower’s identification tag; the make is printed on the plate and the model number appears on the tag.
Find the engine’s metal plate – it’s usually on the side of the housing and lists the maker (Husqvarna, Briggs & Stratton, Kawasaki, etc.). The model number lives on that same plate or on a separate frame label. On a push mower you’ll often see the model stamped into the front edge of the deck. And yeah, always disconnect the spark plug before you touch the engine.
What do Husqvarna model numbers mean?
Husqvarna model numbers encode the series, engine size, and feature set of the mower.
The opening two digits (like 13, 14, 17, or 53) point to the product family. After that, the letters tell you about engine size and fuel type – for instance, “YTH” usually means a 23‑hp gasoline model. The trailing numbers often hint at the year range or any special options. You can find the full decoding in the Husqvarna owner’s manual or on their website Husqvarna.
How do I find the model and serial number on a riding lawn tractor?
Both numbers are stamped on a metal plate located under the seat pan of the tractor.
Kill the engine, set the parking brake, and take off the seat if you need to. The plate will show the model (usually beginning with 13, 14, 17, or 53) and the serial number right below it. Write those down before you put the seat back. Want more help? Check the tractor’s service manual or the Husqvarna support site Husqvarna.
Where is the model number on a yard machine riding lawn mower?
The model number is on a plate attached to the underside of the seat.
Make sure the mower’s off and the spark‑plug wire is disconnected, then flip the seat forward. You’ll see a small metal tag that carries both the model and serial numbers. If the tag’s gone missing, look for a duplicate label on the frame near the rear wheel. Yard Machines’ own docs back this up Yard Machines.
What do the numbers on a Briggs and Stratton engine mean?
The first one or two digits indicate the engine’s cubic‑inch displacement, followed by codes for design series and crankshaft orientation.
Take “23‑2‑12” as an example: it stands for a 23 ci engine, series 2 (vertical shaft), and a right‑hand crankshaft. The third digit often points to the fuel system – carbureted or fuel‑injected. Briggs & Stratton’s technical reference charts have the full decoding Briggs & Stratton.
What do Briggs and Stratton model numbers mean?
A Briggs & Stratton model number consists of three groups: the model series, the engine type, and a code indicating features or revisions.
The first group (say “112”) points to the basic engine family. The second group (like “4”) indicates the displacement class, and the third group (for example “30”) is a production code that may cover emissions compliance or fuel‑system type. You’ll find the detailed tables on the official Briggs & Stratton site Briggs & Stratton.
Where is the model number on a Husqvarna z254?
The model number for a Husqvarna Z254 is stamped on the back of the bulkhead on the left side, close to the engine.
Open the rear panel to uncover the bulkhead; there you’ll find a metal plate stamped with “Z254” and a string of digits. Make sure it matches your paperwork before you order any parts. Husqvarna’s product page shows this spot Husqvarna.
Where is the serial number on a Husqvarna 562xp?
The serial number is visible just behind the sprocket cover, underneath the top handle.
Fasten the mower, take off the top handle if you have to, and hunt for a small metal tag or stamped plate. The serial mixes letters and numbers that reveal the production batch and year. Jot it down before you put the cover back together. Husqvarna’s service manual confirms this location Husqvarna.
What is a model number?
A model number is a unique identifier assigned by the manufacturer to distinguish a specific product version.
It’s handy for tracking specs, warranty coverage, and which replacement parts you need. Keep in mind that a model number isn’t the same as a part number – the latter points to individual components. If you want a deeper dive, check out the Wikipedia entry on model numbers Wikipedia.
How do I find my serial number?
Locate the serial‑number plate on the mower’s frame or engine; it is usually a sticker or metal tag.
Shut off the mower, disconnect the spark plug, and lift the seat or deck as required. You’ll usually find the tag on the back of the deck, beneath the engine, or on the frame’s side. Write down the full alphanumeric code – you’ll need it for service or ordering parts. Husqvarna’s serial‑lookup tool can verify the code Husqvarna.
Where is the model number on a Kohler engine?
The model number is printed on a silver decal attached to the side of the engine cover.
Once the engine’s cool, find the rectangular silver label – it shows the model, serial, and horsepower. If the decal’s worn away, you might still see the model stamped into the casting close to the oil fill cap. Kohler’s engine identification guide includes visual examples Kohler.
How do I find the model number of my Husqvarna?
Read the plate on the mower: the top line is the model number, the second line is the part number, and the bottom line is the serial number.
Find the plate on the frame near the rear wheel or underneath the seat. The model number usually kicks off with “YTH” or “Z” and then digits that signal horsepower. Write down all three lines before you order any parts. Husqvarna’s official parts catalog lines up with these codes Husqvarna.
How do you read Husqvarna?
Husqvarna codes combine letters for the product line and numbers for engine size, year range, and optional features.
Take “YTH2348” as an example: “YTH” stands for the yard‑tractor series, “23” means 23 hp, and “48” is the model variant. You can get the year from the first two digits of the serial number. Husqvarna’s website publishes detailed decoding tables Husqvarna.
What year is my lawn mower?
You can determine the manufacture year by decoding the first two digits of the serial number.
Track down the serial tag (as we covered earlier) and then check Husqvarna’s year‑code chart – for instance, “07” means 2007, “22” means 2022. The owner’s manual usually puts the model year on the inside cover, though that’s often a year ahead of the actual build date. You can double‑check with the official serial‑lookup tool Husqvarna.
What year is a Husqvarna YTH2348?
The Husqvarna YTH2348 was produced from 2007 through 2011.
That 23‑hp yard tractor belonged to the YTH series, which ran for four model years. Serial numbers that start with “07” through “11” line up with those production years. If you need the exact date, cross‑reference the serial code with Husqvarna’s year‑lookup chart Husqvarna.
What engine does Husqvarna use?
Husqvarna mowers use a mix of Kawasaki, Briggs & Stratton, and Husqvarna‑built engines, depending on the model.
Take the 46‑inch Z254 tractor, for instance – it runs a 2‑cylinder Kawasaki engine. Many of the smaller YTH models, on the other hand, rely on a 2‑stroke or 4‑stroke Briggs & Stratton unit. You’ll see the engine type on the engine plate and in the owner’s manual. Full specs are available on the Briggs & Stratton and Kawasaki sites Briggs & StrattonKawasaki.
What is my model number?
For a mower, the model number is the alphanumeric code found on the identification plate attached to the frame.
Find the plate we’ve talked about earlier; the top line holds the model number. You’ll need this when ordering parts or registering the mower. Sure, on a consumer electronic you could check the “About” menu, but for a mower the physical plate is the definitive source.
Where is serial number on a yard machine?
The serial number is stamped on the deck, directly behind the engine.
With the mower off and the spark‑plug wire disconnected, flip the deck over or peek under the rear cover. You’ll usually see a white label bearing a barcode – jot it down before you put any panels back. Yard Machines’ parts catalog relies on this serial to match components Yard Machines.
How do I identify my engine?
Check the engine’s data plate for the model, displacement, and serial number; these identifiers uniquely define the engine.
The plate’s usually stuck to the side of the engine housing or perched on the top cover. It gives you the maker, cubic‑inch displacement, fuel type, and a serial code that folds in the production year. Match those numbers against the maker’s engine database – think Briggs & Stratton or Kawasaki – to confirm the specs. You can use the Briggs & Stratton engine lookup tool Briggs & Stratton.
How do I identify an old Briggs and Stratton engine?
Old Briggs & Stratton engines are identified by the casting numbers stamped on the engine block and the date code on the data plate.
Find the big stamped number on the front of the engine block – that’s the model series. The date code is a two‑digit number (like “84”) pointing to the build year (1984). Extra letters can flag emission standards. Briggs & Stratton’s vintage‑engine guide lays out a full decoding chart Briggs & Stratton.
Where is the part number on a Briggs and Stratton carburetor?
The part number is stamped on the carburetor body near the fuel inlet or on a metal tag attached to the side.
Take off the carburetor cover (engine off, remember) and scan for a string of numbers etched into the metal – they usually kick off with a “B” followed by five digits. That’s the part number that lines up with the catalog and is needed when you order a replacement. Double‑check it against Briggs & Stratton’s official parts database Briggs & Stratton.
Edited and fact-checked by the FixAnswer editorial team.
