1)
Each employee must be trained by a qualified person
, which, according to OSHA, is someone who “by possession of a recognized degree, certificate, or professional standing, or who by extensive knowledge, training and experience, has successfully demonstrated his ability to solve or resolve problems relating to the …
What is the OSHA requirement for fall protection training?
OSHA requires that fall protection be provided at elevations of
four feet in general industry workplaces
, five feet in shipyards, six feet in the construction industry and eight feet in longshoring operations.
Who can provide fall protection training?
The employer shall
provide a training program for each employee who might be exposed to fall hazards. The program shall enable each employee to recognize the hazards of falling and shall train each employee in the procedures to be followed in order to minimize these hazards. The standards contained in this subpart.
Is OSHA responsible for providing skill training?
As part of its OSH program,
each federal agency is responsible for providing appropriate training
to ensure that employees have the knowledge and skills necessary to fulfill their OSH obligations. … OSHA developed these guidelines to address the need for uniform OSH training at all staff levels of the Federal Government.
What are the 4 methods of fall protection?
Categories of Fall Protection
All active fall protection for the construction industry falls into four basic categories:
fall arrest, positioning, suspension, and retrieval
. OSHA provides standards for each category of fall protection.
What are the two types of fall protection?
There are two major types of fall arrest:
general (nets) and personal (lifelines)
.
At what height is fall protection required on scaffolds?
The standard requires employers to protect each employee on a scaffold
more than 10 feet (3.1 m)
above a lower level from falling to that lower level.
How long is a fall protection certification good for?
When Does Fall Protection Training Expire? In most cases, fall protection training expires
3 years after completion
of a certified course. Some operations and companies may require recertification more frequently, but this 3-year period is the standard for BC.
At what height do you need a harness?
OSHA requires workers to wear a full-body harness, (one part of a Personal Fall Arrest System) when they are working on a suspended scaffold
more than 10 feet above the working surface
, or when they are working in bucket truck or aerial lift.
How often should fall protection training be done?
ANSI Z359 recommends retraining
every two years
, but employers have discretion to shorten or lengthen the time between instruction. After initial training, OSHA considers an employee “trained” unless he or she demonstrates incompetence or the environment or equipment changes.
What is fall protection training?
Training includes
review of legislation
, the fall protection plan, fall protection methods required at the work site, identification of fall hazards, assessment and selection of anchors, instruction on correct use of connecting hardware, effects of a fall on the body, pre-use inspections, emergency response procedures, …
What yearly training is required by OSHA?
The following general industry tasks require initial training (new employee orientation) and annual re-training (at least once every 365 days): Access to Employee Exposure and Medical Records and Employee Rights –
1910.1020
.
Asbestos Abatement Training
(OSHA Class I and II) – 1910.1001.
What is the most common fall protection?
On many sites,
guardrails
are the most common and convenient means of fall protection. Where guardrails cannot be used, workers must use another means of fall protection to prevent a fall. Two basic types of fall protection are travel restraint and fall arrest. Both involve wearing a full-body harness.
What is the best method of fall protection?
Generally, fall protection can be provided through the use of
guardrail systems
, safety net systems, or personal fall arrest systems. OSHA refers to these systems as conventional fall protection. Other systems and methods of fall protection may be used when performing certain activities.
What are the two major types of fall protection harness buckles?
Modern fall protection harnesses feature different leg fasteners. You can choose from among
pass-through buckle, tongue buckle, and quick-connect buckle
.
What item is an example of fall protection?
Scaffolds, handrails, barriers and movable platforms can be constructed to protect workers employed at heights. Where these devices are impractical, personal fall protection equipment such as
full body harnesses, lanyards and retractable lifelines
may be used.
