Why Does The Airbag Light Come On In My Jeep?

by | Last updated on January 24, 2024

, , , ,

If the airbag warning light illuminates, it

could indicate that the sensor has failed and that the airbags might not work properly in a crash

. Even if the warning light isn’t illuminated, owners should verify whether their vehicle is affected by this recall.

How do you turn off the airbag light on a Jeep?

  1. Put the key into the ignition and turn the switch to the “on” position.
  2. Watch for the airbag light to turn on. It will stay illuminated for seven seconds and then shut itself off. After it shuts off, immediately turn the switch off and wait three seconds.
  3. Repeat Steps 1 and 2 two more times.

Why did my airbag light randomly come on?

The most common cause for the airbag light coming on is

that the airbag system is deactivated or turned off

. … There may be an issue with the crash sensors or other airbag component. Alternatively, the sensor in the passenger seat that determines whether that airbag should be active or not may be faulty.

How do I get my airbag light to turn off?

  1. Turn on the ignition switch with your car key. …
  2. Wait for the airbag warning light to turn off. …
  3. Turn the ignition switch of your car back off for a little longer than three seconds.
  4. Repeat steps 1 through 3 twice to make three times total.

How do you turn the airbag light off on a Jeep Cherokee?

Locate the yellow plastic electrical connector and unplug the connector by hand.

Find the green plastic electrical connector next to the yellow connector

and unplug it by hand in order to disable the Jeep Grand Cherokee airbag.

How much does it cost to reset the airbag light?

Number 1 — Reset Airbag Light

This process can take several hours of time and usually costs a few hundred dollars, although depending upon the type of car it may be up to

about $600

.

Is it safe to drive with airbag light on?

Is it safe to drive with an SRS light on? … It doesn’t necessarily mean that the car isn’t safe to drive but it’s like playing with fire if you do. When this light is on it means your

safety system isn’t working at 100%

and in some cases, it could mean that your airbags are disabled and will not deploy in an accident.

Can a blown fuse cause the airbag light to come on?


Blown fuses can definitely cause the airbag light to come on

. … When the airbag system is malfunctioning, a mechanic or auto parts store should be able to read the code that the system is putting out which will give them a clue as to what particular problem the airbag is having.

How do I know if my airbag sensor is bad?

Symptoms of a failing airbag sensor

You can easily tell if the sensor is functioning

if the airbag warning light on the dashboard is illuminating every time you start the vehicle

. But, if the airbag warning light stays illuminated after starting the vehicle, this is an indication of an airbag sensor problem.

What does the airbag light look like?

The SRS warning light on the dashboard usually looks like a side view of a person sitting in a seat with a seat belt on, with

a large circle (the airbag) in front of the person

. It will normally light up briefly each time you start your vehicle, and then go off.

Will disconnecting the battery reset the airbag light?

Often, all it takes to get rid of that pesky warning light is to reset your airbag sensor. …

Remove the terminal clamp and leave it disconnected for 5-10 seconds

to allow the airbag sensor to reset. Then reconnect the battery terminal and turn the vehicle on. With a bit of luck, the light will stay off.

Will removing fuse disable airbag?


Simply pulling the airbag fuse may not disable the airbags

. Many ACMs utilize an internal battery to ensure deployment even if the power is cut.

What is the airbag light?

The airbag light is

an indicator that there is a problem with the vehicle’s Supplemental Restraint System

. … When this light comes on, it indicates that a problem has been detected in the system, and one or more airbags may not inflate in the event of a collision.

What does service airbag system mean?

The service airbag light comes on to indicate

there’s a problem with a vehicle’s airbag system

. A problem with the airbag system also means, should there be an accident, the airbags will not be able to properly deploy or may not deploy at all. So in that case a service airbag light coming on is a serious issue.

Is there a recall on Jeep airbags?

Chrysler will notify owners, and dealers will replace the passenger frontal air bag inflator, free of charge. The recall

began February 4, 2019

. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler’s number for this recall is V01.

Can you sell a car with the airbag light on?


You can sell it

, but if someone asks about the airbag light, you should tell them what you know about it.

Charlene Dyck
Author
Charlene Dyck
Charlene is a software developer and technology expert with a degree in computer science. She has worked for major tech companies and has a keen understanding of how computers and electronics work. Sarah is also an advocate for digital privacy and security.