2.
Your Car Won’t Start or Starts Roughly
. If your car doesn’t start or takes several attempts to get running, this could also be another PCM failure system. This can be caused by several different PCM errors, but may also be an indication of something wrong in your ECM.
Will a car crank with a bad PCM?
Problems with the PCM often result in the vehicle not running at all. In other cases, the vehicle may run poorly. Continuing to run a vehicle with a bad PCM could cause further damage.
Can PCM cause no crank?
It is highly possible that symptoms of a bad PCM include
the vehicle not running at all
. All these components play a part in kicking off and running the engine. In that case, the engine will not crank or even if it does, it will not start.
What can cause a no crank condition?
A no-crank condition usually means the starter system on your vehicle is receiving power—or little power—but a
failure in the starter, solenoid
, or some other part in the system—perhaps the engine itself—is preventing the crankshaft from turning.
How do you know if your PCM is bad?
Continuing to run a vehicle with a bad PCM could cause further damage. Because the PCM controls the emissions of your car,
a failed emissions test or the presence of oddly-colored or foul smelling exhaust
may be a sign that your PCM is going bad. A malfunctioning PCM will activate dashboard error lights.
Can you fix a PCM?
PCMs are
not rebuilt
in the same way that alternators and water pumps because there are no mechanical parts that wear out. Remanufacturing in this case usually means testing the computer, isolating and repairing any faults that may be found, then retesting the computer to make sure everything works correctly.
How do I check my PCM power?
You need to check the
sensors that are connected to your PCM
, as well as the wires that connect them. If you’re seeing a PCM code – or two, or three – it can really help you narrow in on which sensors or wires are faulty. Perform a visual inspection of these wires, as well as checking them with a multimeter.
Why won’t my car crank or start?
If your vehicle won’t start, it’s usually caused by
a dying or dead battery
, loose or corroded connection cables, a bad alternator or an issue with the starter. It can be hard to determine if you’re dealing with a battery or an alternator problem.
How do you diagnose a no crank no start issue?
- Faulty Ignition Switch. Your ignition switch is what creates the electrical pathway that is necessary to get your engine to fire. …
- Bad Starter. …
- Failing Alternator. …
- Dirty Fuel Injectors. …
- Bad Fuel Pump.
Will a bad ground cause a no crank no start?
The engine
ground
provides an electrical return path for the starter motor. A bad engine ground is a common problem leading to hard-starting and no-starting conditions. Connect the switch to the control circuit terminals on the starter relay or solenoid. …
Is a PCM and ECM the same thing?
Most people, including automobile technicians, confuse the two for each other. The main difference between the two is that
the ECM controls specific parts of the engine, regulating and sending commands
. While the PCM is used in newer models to control almost all engine functions.
Does a PCM need to be reprogrammed?
You will simply have to take your car to the dealership and set aside some time for them to make the updates. But if you purchased a used PCM as a replacement (usually from a vehicle that was totaled in an accident), you
will need to have it reprogrammed for it to be able to work with your vehicle
.
How do you reset a PCM?
- Open the hood of the vehicle.
- Disconnect the negative battery cable from the battery. Use a wrench to loosen the lock nut, and pull the cable off. This cuts the power to the PCM. Wait for five minutes.
Can you replace a PCM yourself?
The PCM, power train control module, within your Vehicles manages the engine control system. … The PCM is a silver box with large electrical connectors coming from it.
You can replace the PCM without the help of a mechanic
, but you must first purchase the correct PCM Vehicles your car.
How much does it cost to fix a PCM?
In some cars, there are multiple computers, and with other cars, there are just a few. The PCM controls more than 100 factors in your car, and for that reason, is very important – and expensive. A typical pcm replacement cost comes to
between $500 and $1,500 on average
.
Can a bad PCM drain your battery?
Lastly, a
failed PCM relay can cause the battery to drain over time
due to the switch constantly being turned on, or a dead battery. If they relay short circuits, it can drain the computer battery, even when the vehicle is turned off.
