What Rims Will Fit A Dodge Caliber?

by | Last updated on January 24, 2024

, , , ,
Caliber Bolt Pattern (Lug Pattern) PCD 5×114.3 See Adapters Center bore (hub bore) 67.1 mm Use Hub Centric Rings Thread size (Lug Nut Size) M12 x 1.5 Lug Nuts Stock Rim Sizes Range 15×6.0 – 20×8.5 Hubcaps Tire sizes 205/70 R15 , 215/65 R16 , 215/60 R17 , 215/55 R18 , 225/45 R19 , 245/35 R20

Will Chevy rims fit a Dodge?

All the Chevy and 8 lugs rims should interchange as far as the hole spacing goes .

What bolt pattern does Dodge use?

The Dodge Ram 1500 uses a lug pattern with A5x5 specification . ThiS5 bolt pattern is also often called A5x139 lug, so You may find it listed under that name as well. Lug nuts come in a variety of different materials, each serving a different purpose, be it structural or aesthetic.

How do you know what wheels will fit car?

The two easiest ways are to check the sticker plate in your car , it should be located inside the driver side door, or look online for the vehicle specifications for your exact make and model. That should tell you the standard rim size.

What size tires are on a Dodge Caliber?

Depending on trim level, the Dodge Caliber has tire sizes including, but not limited to P205/70R15, P215/60R17 and P215/55R18 .

Are Chevy and Dodge 8 lug rims the same?

Yes they will . I think the only difference is that Dodge's wheels are hub centric where Chevy's are lug centric. Stock wheels are hub centric for both. Aftermarket wheels have a bigger hole to fit Dodge and are lug centric on a Chevy.

Does Dodge and GMC have the same bolt pattern?

Dodge and GM still use the same pattern unless it's a 2013 and up GM . They have also switched to a different pattern. Keep in mind also that the center bore on a GM is a bit smaller than a Dodge so it would have to be machined to fit the hub.

Will 5 lug Ford rims fit dodge?

Yes , Dodge truck wheels will fit Ford, but the right type of lugnut will be required. ... The Dodge 5 lugs are the same when compared to the Ford 5 lug that makes it certain that the dodge truck wheels will fit Ford easily.

What is a 5×5 5 bolt pattern?

The 5×5. 5 Bolt Pattern or Pitch Circle Diameter (PCD) is made up of the stud count (5) and the bolt circle measurement (5.5), the notional circle determined by the center position of the studs.

Will dodge Charger rims fit on a Dodge Ram 1500?

No , your wheel is a 5 on 115mm which translates to about 4.5′′. The ram wheels are 5 x 5.5′′ so thats not going to work. Also, factory Dodge Charger wheels have about a 20mm offset so when your looking at wheels, consider that too.

Are all 17 inch rims the same?

Common rim sizes include 15, 16 and 17 inches. Rim size will vary depending on the make and model of the car and manufacturers may release different models of the same car with different rim size options.

Can you put different size rims on a car?

Wheels and tires are not interchangeable words. ... For instance, your vehicle has a set size of rims, but you can buy different sizes of tires to fit those rims, as long as the middle of the tires is the correct size . That being said, a vehicle with bigger rims will often be able to fit larger tires than other vehicles.

Do bigger rims affect gas mileage?

However, they do play a role in how efficiently your car performs, depending on how well they are maintained and the size of your wheel. ... (Pixabay / flok85) For example, larger tires decrease your fuel economy because they are heavier, while smaller tires increase fuel efficiency.

What kind of tires does a 2007 Dodge Caliber have?

2007 Dodge Caliber Rim Size Tire Sizes Dodge Caliber Options 15-Inch 205-70-15 SE 17-Inch 215-60-17 SXT 18-Inch 215-55-18 R/T
David Evans
Author
David Evans
David is a seasoned automotive enthusiast. He is a graduate of Mechanical Engineering and has a passion for all things related to cars and vehicles. With his extensive knowledge of cars and other vehicles, David is an authority in the industry.