Wiring the remote turn on wire with an aftermarket head unit is pretty straightforward. Simply connect another piece of
blue primary wire
to the blue wire in the wiring harness and run the primary wire back to the amplifier to terminate in the remote turn on terminal.
Where do I connect the remote wire for my amp?
The turn-on wire (also called the remote wire) is
located behind the stereo
. On aftermarket stereos, it’s usually a blue and white wire. The remote wire will “tell” your amplifier to turn on whenever the stereo is powered up (usually, whenever the vehicle is turned on).
Do I need to connect remote wire to amp?
Amplifiers do not have to use the remote off of your deck.
You can use any suitable power source
. The only thing you want to make sure is that you find a source the turns off with your key otherwise you may end up draining the battery.
What color is the remote wire on a wiring harness?
|
Pin Number Wire Color Function
|
5
Blue or White
Amplifier Remote
|
6 Blue Antenna Remote
|
7 Red Accessory 12 Volts
|
8 Black Ground
|
Is the power antenna wire the remote wire?
Almost every aftermarket head unit has a
remote turn on wire
. Some manufacturers call it a power antenna wire. But regardless of the label all it does is output a positive 12 volts when the head unit is turned on. It should be noted that some head units have both a remote turn on wire and a power antenna wire.
Can you run remote wire with RCA?
You can run the remote wire
right along the RCA’s
.
What color is a remote wire?
|
Wire Color Wire Function
|
Red Switch / Accessory
|
Black Ground
|
Blue
Antenna Remote
|
Blue with White Stripe Amplifier Remote Turn-on
|
What is the best fuse for remote wire?
Amperage off the remote turn on isn’t very high. Doesn’t require much to switch amps/etc on. A
3-5 amp fuse
should be more then enough.
Can I use any wire for remote wire?
It doesn’t matter what kind of wire you use for a remote wire.
Any copper wire will work
when used as a remote wire. Since most speaker wires are made of copper metal, they can be used for remote wiring.
What gauge is remote turn on wire?
Remote Turn-On Wire: Gauge:
18 AWG
. Wire Construction: Oxygen Free Copper (16 strands)
What color are positive and negative speaker wires?
For speakers that have wires with colors, typically,
the positive wire is red and the negative wire is black
.
What does the mute wire connect to?
Usually a “mute wire” is an optional physical wire/pin on the radio harness that signals it to
mute regular audio
, and pause any pause-able media that’s playing.
What is SWC connector?
What is a SWC interface? SWC is an acronym standing for
Steering Wheel Control
. An SWC interface is a module that connects a vehicle’s OEM steering wheel controls with an aftermarket headunit or radio replacement unit.
What color wire is power on car stereo?
Power Wires: There are three power wires. The
yellow wire is
the one that supplies a constant 12V, the red wire is for accessories, and the orange wire with white stripes is for the dimmer or for illumination.
What color is power antenna wire?
Ground wires are black, antenna wires are
blue
, and amplifier wires are blue with a white stripe.
What is remote output?
This unit has an audio-sense remote output. Meaning when the radio is turned on, it
senses an audio signal
and sends a 12 volt signal through the remote output wire from the line output converter. That remote output wire needs to go to your external amplifier (2-channel or mono sub-amp) to signal it to turn on.
What is system remote control?
A control system in which the issuing of the control command and its execution are separated by a relatively significant distance
. The system normally includes a command device where the control command is entered, and an actuator that executes it.
Can you run 4 speakers and a sub off a 4 channel amp?
4 channel amps are great and have a lot of flexibility for the most part. However, they’re intended for use with 4 speakers or 2 speakers and a sub – not both. However,
it is possible to wire
a 4 channel amp to 4 speakers and a sub!
Can I run speaker wire with power wire?
According to NEC 300.3(C)(1),
you can only run the speaker cable in the same enclosure as a higher-voltage circuit
if the insulation of the speaker cable is rated for the voltage of the higher-voltage circuit.
What gauge wire should I use for a 1000 watt amp?
If your amp is capable of 1000 watts RMS then it requires
4 gauge wire
.
How do you split a 2 amp remote wire?
You can splice the tip of the remote wire, just before you reach an amp, and
tap 2 wires
, one from each amp. Ive seen some people put a jumper wire from the remote terminal of one amp to the remote terminal of the 2nd amp. It works.
What color speaker wires go together?
The first two conductors are used for the first speaker because two-conductor speaker wire typically contains a
black and red conductor
, with the Black being Negative (-) and the Red as Positive (+).
What is the 12V accessory wire on a car stereo?
The 12V accessory wire is
one of the three power wires a car stereo utilizes
. It is red in color and helps trigger the stereo to come on. However, for this wire to turn on the stereo, your ignition key must be in the accessory position.
Is remote wire 12V?
The remote wire
provides +12V when the unit is turned on
. You can connect it to anything really that you want to be actuated this way. Sometimes head units have a second output for power antenna that would only energize when the radio source is selected.
Can speaker wire shock you?
Speaker wires cannot shock you
. The amount of current that passes through speaker wires is very low and not strong enough to cause an electric shock to humans beings.
What is the yellow wire on car stereo?
The yellow wire is
the 12 volt battery wire
, which should also be attached to the stereo for power. The final wire, the black wire, is the ground wire. This wire, once attached to the stereo, will help ground it.
What are the key 1 and key 2 wires?
These radios’
SWC
wires are often identified as KEY 1 and KEY 2, or SW 1 and SW 2. This enables you to connect your Panasonic, Android radio, or another radio brand to our PAC interface to retain steering wheel controls with the radio without having to modify our 3.5mm connector.
Which wire is positive white or green?
Recognize that the
black wire is the positive one
, the white wire is the negative one, and the green wire is the ground.
Which speaker connection is positive?
Generally speaking, the positive terminal is usually
on the left when the speaker is facing up
.
What is a 18 gauge wire?
An 18 awg solid bare copper wire is the most basic because it doesn’t even have insulation at all. It’s a
solid piece of copper used as a ground wire for most electrical applications
. ... It’s manufactured with a PTFE insulation and silver plated copper strands rating it as high as 200°C.
What color is SWC wire?
SWC Interface Wiring
Each interface (either stand-alone or as part of a multi-function product) has
one blue/yellow wire and one black wire
with a stereo-type 3.5mm plug. Both wires accomplish the same purpose: transfering the SWC signals to the radio.
Which wire is hot when both are same color?
In most modern fixtures the neutral wire will be white and the hot wire
is red or black
. In some types of fixtures, both wires will be the same color. In this case, the neutral wire is always identified by some means.
